CLINICAL DECISION-MAKING IN PATIENT-CENTRED NURSING CARE
Margaret Omowaleola Akinwaare
Department of Nursing, Faculty of Clinical Sciences
College of Medicine, University of Ibadan. Nigeria.
E-mail: margaretakinwaare@gmail.com
Margaret Omowaleola Akinwaare
Department of Nursing, Faculty of Clinical Sciences
College of Medicine, University of Ibadan. Nigeria.
E-mail: margaretakinwaare@gmail.com
G.A. Wokocha1 and Sunny Aziaka2
1Department of Integrated Science, Ignatius Ajuru University of Education Port Harcourt
2Department of Science Education, Rivers State University of Science & Tech. Port Harcourt
ABSTRACT
This experimental study was undertaken to determine the prevalence of hepatitis B in rural areas of Rivers State. A total of 250 samples made up of 108 males and 142 females were randomly sampled from five communities in Rivers State. Hepatitis B surface antigen was detected with the use of ACON rapid diagnostic test strips. The findings show:
Musa Kani Zakari,*Farida Garba Sumaila, Umaru M. Badaru, Aisha M. Bala
Department of Physiotherapy, Faculty of Allied Health Sciences,
College of Health Science, Bayero University Kano, Kano Nigeria.
Email: fareedat2006@gmail.com, fgsumaila.pth@buk.edu.ng
ABSRACT
Dyeing has a long history in the ancient Kano dated back to 1498,It is an occupation that involves adoption of series of posture and movements which might have impact on body structure, function and general wellbeing. Textile dyeing and processing in the World is a delicate occupation and it involves more than 30% of the active population. The common cause of pain in most occupations is musculoskeletal disorders therefore this study investigated the pattern of musculoskeletal disorders among the textile dyers. The main aim of the study was to investigate the prevalence, pattern and risk factors of work related musculoskeletal disorders by age and working experience among textile dyers in Kano. The research was a cross sectional survey, a letter of Introduction was obtained from the department of physiotherapy, Bayero University Kano, Nigeria and then it was presented to the chairman of the Kano State Dyers Association. Approval letter was obtained from the chairman of the association and the aim of the study was explained to the textile dyers whose participation was voluntary. The questionnaire was self-administered and retrieved later. A sample size of 250 participants was calculated out of which 230 participated, all the 230 participants were males (100%), with a response rate of (92%).The age group with the highest number of complaints of WRMDs were between 31-40 years, with most of them reporting shoulder pain(77%),low back pain (74.8%) and upper back pain (64.8%). Elbow pain accounted for (58.3%), wrist pain (54.8%), neck pain (37.45%), hip and ankle (29.6%), and (27%) respectively. Thumb (26.1%) and knee (20.9%) are the least common sites in the last 12months.It was found that the common risk factors were having a prolong position (62.6%),over time work(54.8%),awkward posture(40.9%) and repetitive motion(33%). This implies that excessive work for a prolong period of time could lead to development of marked injuries that could be disabling. It can be concluded that the pattern of work-related musculoskeletal pain occurs moderately among textile dyers within Kano Municipal, shoulder pain being the most prevalent.
Awareness campaign on the need for textile dyers to avoid prolong posture when at work should be organised. This should ensure that they take some rest after every hour of work so as to prevent musculoskeletal pain and stress/fatigue.
Keywords: Work Related Musculoskeletal Disorders, Prevalence, Risk, Textile Dyers
Influence of Industrial Waste Management, Workers Safety Practices and
Occupational Health Attitude on Employees Health Status in urban Community
in Nigeria.
Olaoke, Ibitola Olajumoke, Popoola, Olusoji David 1-18
Environmental Toxin, Exposure to Toxins among Children around Cement
Factory (Review)
M. Musa, E.A Bagna, L. Abubakar, S.M Adamu, U. Abdulmuminu, S. Muhammad 19-32
The Geology of the Kaltungo Inlier Upper Benue Trough, Northeast Nigeria
Raymond P Tabale, Eyo ENtekim, Jonathan Barka and Adeyinka Olasehinde 33-45
Environmental Implication of Conflicting Agricultural Practises in Nigeria:
Animal Husbandry Versus Crop Production.
Effiong, Cyril J. 46-62
Suitability of Waste Glass Powder as Partial
Replacement of Cement in Sandcrete Block
Audu Isa Ibrahim Dakas1 and Stephen Ilemona Omakoji 63-76
Geometric Transformation of Google Earth Imagery to Generate Orthophoto Images for Survey Practices
Edan, J.D. and Bem A.A. 77-90
Public Awareness and Perceptions towards Physical Planning in Nigeria:
A Case Study of Talata Mafara, Zamfara State
Hadi Aliyu & Ismail Usman Kaoje 91-103
Raymond P Tabale1, Eyo ENtekim2, Jonathan Barka1 and Adeyinka Olasehinde1
1Department of Geology, Gombe State University
2Department of Geology, Modibo Adama Federal University of Technology Yola
E-mail: tabalepeter@yahoo.com
ABSTRACT
Field mapping of the Kaltungo inlier showed disposition of the rock units outcropped as stocks, plugs and intrusions were characteristic of a rocky outcrop. The litho logic units delineated in the study area consist of porphyritic biotite granite, biotite granite, medium grained granite, micro granite, pegmatite, diorite, protocataclasite, trachyte, trachy-andesite and basalt while the oldest sedimentary unit in the Upper Benue Trough, the Cretaceous Bima Sandstone Formation surrounds the inlier. Major strike-slip fault cross-cut the inlier from Labeke to Ture Pandi trending N600E into the western block around Kufai, Billiri, Kalmai, Banganje, Tanglang and Tal and the eastern block around Kaltungo, Okra, Poshereng, Popandi, Lapan, Karel, Labeke Kulishin and Ture Pandi. The inlier is intensely sheared and faulted, trending dominantly NE-SW and NW-SE direction is in agreement with the general structural trend of the Nigerian Basement Complex.
Hadi Aliyu & Ismail Usman Kaoje
Department of Geography
Faculty of Arts, Social and Management sciences
Federal University, Birnin Kebbi, Kebbi State
Email: aliyuhadi14@gmail.com
ABSTRACT
Land
has been the major pivot of physical planning and development in Nigeria and virtually
the entire world, and physical planners as the major promoters of development.
Besides, numerous questions are being raised by the public regarding the status
and credibility of physical planning. Thus, the aim of this paper is to examine
the level of public awareness and perception on physical planning profession
and practices and it’s implication on the effectiveness or otherwise. For
this purpose, systematic random sampling
was implored in sample choice and questionnaire administration to the selected
samples, interviews were conducted with some
officials of planning authority. Relevant literatures were consulted also. The collated
data was analysed. It reveals from the study that, most of the public are short
of what town/physical planning is all about;
in terms of its rules, laws and activities which seems to hinder the
effectiveness of the profession and its practice. To achieve effective planning
practice in the study area, the study recommends the need for frequent public
enlightenment Programmes on TV channels, Radio and print medias by Government, NGO’s
and professional bodies of Planning. It also recommends the recruitment of more
staff, organized public lectures, provision of more surveillance vehicles and
adequate funding. Planning bodies should also advocate zero tolerance to
corruption and planners should stick firmly to their code of conducts.
Keywords: Public, Awareness and Perception, Physical Planning laws, Talata Mafara
1Edan, J.D. and 2Bem A.A.
1Department of Surveying and Geoinformatics, Modibbo Adama University of Technology Yola, Adamawa State, Nigeria:
2Adison Surveys & Engineering Services Nig. Ltd, Port-Harcourt, Rivers State, Nigeria
Email: johnsonedan@yahoo.com
ABSTRACT
In this paper, effort has been made to geo-transform Google Earth imagery. The first order polynomial (Affine) method of geometric transformation was used to register imagery obtained from Google Earth using ArcMap 9.3 software. The real-world coordinates of Ground Control Points (GCPs) used in geo-transforming the image was obtained with Leica GX1230 GPS in static mode. The geometric accuracy of the initial transformed image was 0.04066m RMSE, and 0.00057m RMSE for the rectified image. To further test the accuracy of the image produced, a landed property from a geodetic GPS survey was overlaid on the imagery and a significant result was obtained. The analysis of the results obtained revealed low resolution of the imagery produced, which indicated that the geo-transformation of Google Earth imagery is not good enough for geodetic or large scale engineering purposes. However, it can be inferred that the geometric transformation of Google Earth imagery is an alternative tool for generating imagery for cadastral and small scale engineering surveys.
Keywords: Geometric Transformation, Google Earth Imagery, Ground Control Points, Orthophoto, Real-World Coordinates, and Resampling,
Audu Isa Ibrahim Dakas1 and Stephen Ilemona Omakoji2
1,2Department of Building,
Faculty of Environmental Sciences,
University of Jos, Jos, Nigeria
Email: abdullahidakas@gmail.com
ABSTRACT
Waste materials, glass inclusive abound everywhere in the environment which has negative impacts on the environment. Also, the need for more and alternative building materials opens opportunities for sourcing of suitable materials. This paper investigates the suitability of Waste Glass Powder (WGP) as a cementing material to partially replace conventional Ordinary Portland Cement (OPC) in sandcrete block. To determine that, the particle size effect was evaluated using glass powder of sizes less than 100μm. A series of tests were conducted to determine the chemical composition of the WGP for cementitious characteristics and to study the effect of 10%, 20%, 30% and 40% replacement of OPC by WGP at mix proportion of 1:6 by weight. For the purpose of compressive strength test, 45 each of 225 x 225 x 450mm hollow sandcrete block and 100 x 100 x 100mm mortar cubes were produced and tested. The results show that the compressive strength of the blocks increases with increase in the percentage replacement. Blocks produced with 10% partial replacement have strengths which vary from 2.52N/mm2 at 7 days curing to 3.42N/mm2 at 28 days curing, while that of 20% partial replacement have strengths which vary from 2.84N/mm2 at 7 days curing to 3.46N/mm2 at 28 days curing. The control blocks (at 0% of WGP) vary from 2.29N/mm2 at 7 days curing to 3.29N/mm2 at 28 days curing. It is thus observed that the 28 days curing compressive strength value of 3.46N/mm2 at 20% replacement satisfies BS 2028 requirement. Thus, 20% is the optimum percentage replacement of OPC with WGP. It was also observed that blocks made with 10% replacement absorb less water than the control blocks. The implication of the results is that WGP is suitable for sandcrete blocks at 20% partial replacement and for water absorption property, up to 10% replacement is suitable.
Effiong, Cyril J.
Department of Urban and Regional Planning
University of Uyo, Uyo
Email: cyrileffiong@uniuyo.edu.ng
ABSTRACT
Agricultural practises are known to be complementary as the waste of one tends to be the raw materials in the activities of the other. This is peculiar to crop production and animal husbandry as the dungs of animals are useful materials for enhancing the performance of soils for crop production. However, the tide seems to be turning in some part of Nigeria with the rise in conflict of interest of practitioners of the two agricultural endeavours. The activities of animal husbandry especially cattle rearing appears to be counterproductive on the production of crops as grazing animals feast on crop plantation. This negative act is injurious to man-environment nexus at the same time detrimental to food security and food supply. Conflict in any political entity has multifarious consequences on the physical, human, environmental and capital factors diminishing available opportunities for sustainable development. In the light of many challenges faced by crop production farmers in rural communities in most Nigerian cities, this work examined environmental implications of conflicting agricultural practises while examining the need for mediation-negotiation as an essential arbiter in alternative dispute resolution whereby they share a common vision and demonstrate sufficient political will to manage the loggerhead between farmers and herdsmen in their domain and invariably boost food supply in the country.
M. Musa, E.A Bagna, L. Abubakar, S.M Adamu, U. Abdulmuminu, S. Muhammad
Department of Chemistry,
Shehu Shagari College of Education, Sokoto, Nigeria.
Email: mustaphamusa63@yahoo.com
ABSTRACT
Environmental toxicant may refer to pollutant causing pollution or biologically created toxins in the environment. Chemicals, both natural and synthetic, have the potential to cause disease by either inhalation or ingestion. Toxins threaten everyone’s health, but infants and children are more sensitive to toxins than adults, because children organs are still developing and their bodies are less able to detoxify. Children are also more vulnerable to toxins because they lack a fully developed blood-brain barrier and a structure in the central nervous system that prevents the passage of chemicals between the bloodstream and the neural tissue. This research emphasis on identifying and evaluating children exposure to environmental toxins around cement factory and health related issues; the review describe different types of environmental toxins around cement factory and their health effects towards children.
Enter your email address
Enter OTP
Enter a new password below
@ Developed By cenresinjournals WordPress
Recent Comments