EFFECTS OF FORWARD SPEED ON THE PERFORMANCE OF A DISC PLOUGH

1Kudabo, E.A and 2Gbadamosi, L

1&2 Department of Agricultural Engineering and Water Resources

Institute of Technology, Kwara State Polytechnic, Ilorin

E-mail: emmanuelkudabo1@yahoo.com

ABSTRACT

The study was carried out on the effect of forward speed and depth of cut on the performance of a disc plough in silt clay loamy soil at soil moisture content of 7.3% (db) and bulk density of 1.73g/cm3 at the departmental farm of Agricultural Engineering Department, Kwara State Polytechnic, Ilorin. The mounted disc plough was tested at three forward speeds of 7km/h, 10km/h and 12km/h, two different depth of cut of 15cm and 20cm were used.  The result shows that Soil Inversion increased positively as forward sped and depth of cut increases.  The travel reduction increased negatively in both depth of cut with increasing forward speeds.  Higher percentages of small soil aggregates were produced at lower forward speed and 15cm depth of cut. The result further reveals that the rate of Fuel Consumption increases as the forward Speech increases.

Keywords: Effect, forward speed, depth of cut, Disc Plough, Travel Reduction, Soil Inversion, Soil aggregate and Fuel Consumption.


THE IMPACTS OF CONSTRUCTION ACTIVITIES AND SUSTAINABLE DEVELOPMENT IN NIGERIAN ENVIRONMENT

I.Y. Mohammed

 Department of Building, School of Environmental Technology

Abubakar Tafawa Balewa University, Bauchi Nigeria

ABSTRACT

Environmental concern and political conscription to address them have risen in recent decades. There is growing awareness that it is impossible to separate economic development issues from environment issues; many forms of development erode the environmental resources upon which they must be based, and environmental degradation can undermine economic development. Thus today’s environmental challenges arise both from the lack of development and from the unintended consequences of some forms of economic growth.  It is therefore futile to attempt to deal with environmental problems without a broader perspective that encompasses the factors underlying its immediate causes. Different industries all over the world are trying to redefine their goals and perspectives and make their operations socially more acceptable and resource-wise sustainable but at the same time preserve and strengthen their uniqueness as vehicles of economic growth and national development. Construction activities constitute powerful influence on the environment. The objective of this paper is to underscore the impacts of the construction activities on the environment, assess current evidence and experience, identify the linkages between different construction activities and the environment and draw from these implications for reorientation in design and implementation of construction projects.


TRACE ELEMENTS CONCENTRATION DETERMINATION IN WATER FROM KEANA MINE AREA USING THE INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP – OES)

Achide Samson Achide

Department of Science

College of Agriculture, Lafia, Nigeria

Email: gistwitachide@yahoo.com

ABSTRACT

Water samples across Keana Salt mine area of Nasarawa State were subjected to elemental analysis by Inductively Coupled Plasma Optical Emission Spectrometry technique, with the aim of building upon the information in the database of trace element concentration in water from the area and to assess the extent of environmental hazard or otherwise. The analysis was carried out at the department of Geology and Mining of the University of Jos. A total of 8 water samples were drawn from sources across the study area, comprising of 4 Stream samples and 4 Borehole samples. Analysis was carried out for a total of seven (7) elements which included As, Cd, Cr, Sr, Pb, Zn and Th. Arsenic (As) was detected in all the samples at a mean concentration of which is very high when compared with the recommended maximum permissible value of 0.010 mg/L by the Environmental Protection Agency. The mean concentration of Sr in the samples was. The maximum permissible concentration for this element vary from 0.8 – 5.0 mg/L, therefore the concentration detected may just be acceptable. These observations suggest that water from the study area should be closely monitored to reduce its harmful effects on the environment and health of the inhabitants.

KEYWORDS: Mining, Inductively Coupled Plasma Optical Emission Spectroscopy, Trace   Elements, Elemental Concentration.


Table of Contents

Determination of Trace Metals in Moringa Oleifera (Drumstick) In Kazaure

Township, Jigawa State of Nigeria

Fowotade, S.A. and 2Abdallah S.A.………………………………………………………………………………                     1- 4

Geomagnetic Storm Effects on F2 Layer Peak Electron Density and Other Profile

Parameters at High Solar Activity at an Equatorial Station

George Atilade Àlàgbé……………………………………………………………………………………….…………               5-12

MHD Boundary Layer Flow past a Stretching Plate and Heat Transfer and Its

Numerical Study

Mohammed Abdullahi; Abba Vulgwe Mandara and Adam Mari Maina………..…….                   13-20

Expert System Design for PC Troubleshooting

Japheth B. R. and Bubou G. M.……………………………………………………………………….…..………             21-34

Energy Production from Organic Waste

Hayatu Abba Ibrahim and Mohammed Maina………………………………………..……………..         35-42

Political Violence and the Negation of Democratic Stability in Nigeria:

 Implication for the Fourth Republic

Alfa Patrick Innocent and Otaida Eikojonwa………………………………………………..……….…                43-51

Exploring Computer System Software for BOQ Automation in Nigeria:
Comparative Study of Ms Access and Ms Excel

Inuwa, I.I.; Iro, A.I. and; Gambo, N………………………………………………..……………………………               52-65

The Reverberation Time and Congregational Response to the Acoustics of Some Large

 Churches in the Jos Metropolis

L. Obagboye, Bulus Gyang and A P Onuche………………………………………………………….                  66-74


THE REVERBERATION TIME AND CONGREGATIONAL RESPONSE TO THE ACOUSTICS OF SOME LARGE CHURCHES IN THE JOS METROPOLIS

L. Obagboye1, Bulus Gyang2 and A P Onuche3

1School of Theoretical Physics National Mathematical Centre Abuja

2Department of Physics, University of Jos

3Department of Mathematical Sciences University of Petroleum Resources Effuru  

ABSTRACT

This paper investigates why some very expensively built church auditoria turn out to be below standard as far as good acoustics and sound intelligibility is concerned. The study included the physical aspects –measurements of the dimensions of the auditoria and other physical parameters that would affect the acoustics on the one hand, and obtaining the responses of the congregation on the auditoria acoustics on the other hand. Reverberation time for the enclosures considered was calculated from the slope of the sound as plotted by a sound level recorder and the Sabine’s formula. There is a correlation between the complaints of the users of the auditoria and the results obtained.

Keywords: Intelligibility, Reverberation Time (RT) and Acoustics of Large Church Auditoria.


EXPLORING COMPUTER SYSTEM SOFTWARE FOR BOQ AUTOMATION IN NIGERIA: COMPARATIVE STUDY OF MS ACCESS AND MS EXCEL

1Inuwa, I.I.; 2Iro, A.I. and; 3Gambo, N

1,2 & 3Department of Quantity Surveying Programme,

Abubakar Tafawa Balewa University, Bauchi-Nigeria

Email: inuwaibrahimibrahim@yahoo.com

ABSTRACT

The software use in accomplishing QS tasks in Nigeria are all of foreign origin and their cost is an important factor which consequently attracts more cost to the construction project clients in form of overheads. Nowadays, computer system software are being widely used by most of the Quantity Surveying practicing firms as well as individual practicing Quantity Surveyors that cannot afford buying the purposely made billing software by reasons of financial constraints, lack of exposure to the latest advancements in the area of information technology and computing and/or competent personnel that will handle the latest sophisticated Quantity Surveying software for the preparation and management of BOQ. This research aimed at exploring computer systems software, exclusively to uncover the most efficient system software between Microsoft access and Microsoft excel for BOQ automation in Nigeria. The research design is contextual, descriptive and analytical. The research conducted an extensive literature search to obtained secondary data. A set of 25 criterion comparing the efficiencies of the two system software for processing and managing data extracted from Microsoft manufacturer’s manual are used as a benchmark for obtaining the primary information (data) on the basic functionalities of the two applications on a weighting scale of 0-2. And the indicators, Apply (absolutely efficient), Acceptable (partially efficient) and doesn’t Apply (absolutely inefficient), are weighted as 2, 1 and 0 respectively. Paired t-test was use to test the research hypothesis at 5% level of significance and establishes that MS Access is more efficient than MS Excel in the preparation and automation of BOQ. The research findings revealed that both MS Excel and MS Access are both efficient in the preparation and automation of BOQ, however, MS Access is 26% more efficient than MS Excel. It recommends’ the use of both system software for BOQ automation and for other QS services.

Keywords: Computer and ICT; MS Excel; MS Access; BOQ Automation; QS Services.


POLITICAL VIOLENCE AND THE NEGATION OF DEMOCRATIC STABILITY IN NIGERIA: IMPLICATION FOR THE FOURTH REPUBLIC

  1Alfa Patrick Innocent and 2Otaida Eikojonwa

1Department of Social Science and Humanities the Federal Polytechnic, Idah Kogi State

2Department of Political Economy School of Post-Graduate Studies

Kogi State University Anyigba

E-mail:  alfaintellectual@yahoo.com; unwagab@rocketmail.com

ABSTRACT

The paper asserts that political violence has been a major road-block to democratic stability in Nigeria.  It argues that the excitement and euphoria that greeted the country’s return to democracy on May 29, 1999 has drastically waned and cynicism and fear have become the other of the day.  The methodology adopted is that of secondary data and insights were drawn extensively from the conflict theorists. The paper concludes with a ray of hope by suggesting antidotes to political violence and prescriptions for attainment of democratic stability by Nigeria

Key Words: Political Violence, Democracy, Democratic Stability, Democratic Consolidation, Nigeria.    


ENERGY PRODUCTION FROM ORGANIC WASTE

1Hayatu Abba Ibrahim and 2Mohammed Maina

Department of Physics, University of Maiduguri, Borno Nigeria

Department of S.L.T., Ramat Polytechnic, Maiduguri, Borno, Nigeria

E-mail: hayatuabbaibrahim@yahoo.com

ABSTRACT

In this research work, organic wastes were used for the production of biogas. The generation of energy, from organic wastes ( animal wastes ) millet stalks, which is the biomass was used in carrying out the experiment, and also  cell lysate and then a digester was used for the fermentation which is a drum type digester. The result shows that, from the digestion of organic wastes ( biomass ) and the cell lysate, methane gas was obtained as the biogas. The production showed that about 60-70% of methane and 40% of carbondioxide were obtained. Other gases obtained were hydrogen sulphide 0.5%, sulphurdioxide of about 0.4 – 0.6% . The maximum temperature maintained was about 50 – 60 0 F (=280C ) .This research shows that organic wastes could be used as an alternative to energy source.

Keyword: Biomass, digester and Biogas


EXPERT SYSTEM DESIGN FOR PC TROUBLESHOOTING

1Japheth B. R.  and  2Bubou G. M.

1Department of Mathematics/Computer Science, Niger Delta University, Yenagoa

2National Centre for Technology Management, South-South Zonal Office

Niger Delta University, Yenagoa Bayelsa State

E-mail:jbunakiye@yahoo.com; gbubou@gmail.com

ABSTRACT

Computers have simplified our working life to be more efficient and productive, for example, communication can be done through mail and instant messaging, presentation can be shared through Netmeetings and meeting minutes can be stored in workspace or shared drives. Computers, especially notebooks and laptops  are very synonymous with mobile lifestyles as it is very convenient. LAN and wireless facilities which allow users to access borderless information at anywhere and at any time, turn the computer into a necessity rather than a luxury. However these gadgets sometimes malfunction and not every computer owner is a troubleshooter or able to find out the root cause of the malfunction. This is where the expert system is needed for help to any user as a first aid approach to identifying and solving the problem. This paper presents one of such expert system designs and is limited to PC hardware maintenance and troubleshooting covering to the Monitor, Hard drive, Keyboard, Mouse, Audio device, and Missing/Lost Documents via a rule base diagnostic system using PHP


MHD BOUNDARY LAYER FLOW PAST A STRETCHING PLATE AND HEAT TRANSFER AND ITS NUMERICAL STUDY

Mohammed Abdullahi; Abba Vulgwe Mandara and Adam Mari Maina

Department of Mathematics and Statistics

University of Maiduguri, Maiduguri, Borno State, Nigeria

e-mail: abdull109@yahoo.com

ABSTRACT

In the present paper, the boundary layer flow of viscous incompressible and electrically conducting fluid past a stretching plate has been considered. The boundary value problem governing the flow has been solved as initial value problem for velocity function using shooting method first, then Runge-Kutta method of order four. The values of velocity function so obtained have been used in the solution of heat transfer problem. The results have been discussed graphically.
Keywords: Boundary layer equation, Stretching plate, heat transfer.

Recent Comments

    Categories