THE ROLE OF VOCATIONAL AND TECHNICAL EDUCATION IN PROMOTING ECONOMIC AND ENVIRONMENTAL SUSTAINABILITY

Aliyu Mohammed Bisalla, TPL. D.U Abubakar & TPL. Emmanuel Aiyenajeh

Department of Arts and Industrial Design, Federal Polytechnic Nasarawa

Department of Urban & Regional Planning, Federal Polytechnic Nasarawa

E-mail: bisalla2003@yahoo.com

ABSTRACT

Vocational and Technical education is a vital component of education in development of practical and sellable/marketable skills for national economic empowerment and development in Nigeria. It is, therefore, a catalyst for diversifying Nigeria economy that is over depended on the oil sector of the economy for revenue acquisition. This paper started the discussion with detailed definitions and clarification of a few vital concepts. The paper also looked into the history of the development of vocational and technical education in Nigeria, it effect on the industrial revolution, socio-economic and political stability in Nigeria. It also clarifies the different skill acquisition through vocation and technical education in our tertiary institutions for manpower development. This paper also examines some certain factors responsible for the setback in vocational and technical education for sustainable growth and development. It also makes recommendations on how vocational and technical education can be given top priority in both formal and informal educational system for sustainable economic development

Keywords: Education, Diversification, Sustainability, Nigeria, Vocational, Skills


Table of Contents

An Improvement Forecast Using Vector Autoregression Approach

on Tax Revenue in Nigeria

Baba Gimba Alhassan and Nma Musa Tela                                                   1-34

Internet of Things Based Data Logger System for Temperature

and Humidity Monitoring Using Microcontroller

Adewole Adekunle Olu  & Onaneye Abiodun Adefolarin                                35-48

Effect of Glass Thickness on Solar Still Performance

Benjamin Ternenge Abur, Haruna Abubakar and

Gideon Ayuba Duvuna                                                                49-58

Life Cycle Cost Analysis of a Multi-Tray Solar Dryer with

Thermal Energy Storage Bed

Benjamin Ternenge Abur and Muhammad Hadi Ibrahim                               59-74


LIFE CYCLE COST ANALYSIS OF A MULTI-TRAY SOLAR DRYER WITH THERMAL ENERGY STORAGE BED

Category : Uncategorized

1Benjamin Ternenge Abur and 2Muhammad Hadi Ibrahim

1,2Department of Mechanical/Production Engineering, Faculty of Engineering and Engineering Technology, Abubakar Tafawa Balewa University, Bauchi

1engrbenjaminabur@gmail.com

ABSTRACT

A simple multi-tray natural convection solar dryer incorporating a sensible thermal energy storage bed has been developed using locally sourced materials. The sensible heat material is gravels of 45kg beneath the solar air heater.  Test evaluation shows a temperature range of 29 to 56.5°C for the drying chamber while the heat storage bed temperature ranges between 31 to 57.8⁰C at the uppermost part of the bed. It took 48 hours to reduce the moisture content of 7.50kg of fresh tomatoes at 93% to 5.5% under the weather condition of Bauchi in the month of February. Samples dried with the solar dryer were of superior quality compared to the open sun method. The computed payback period of the solar system ranges from 2.42 to 4.28 years using the annualized cost method and is lower than the expected life of the dryer. Also the amount of money that could be save from using the system compare to an electric powered dryer is worked out including the present worth, annual cash flow and cost of drying.

Keywords: Indirect solar dryer, thermal energy storage material, life cycle cost, payback period.


EFFECT OF GLASS THICKNESS ON SOLAR STILL PERFORMANCE

1Benjamin Ternenge Abur, 2Haruna Abubakar and 3Gideon Ayuba Duvuna

1Department of Mechanical/Production Engineering, Abubakar Tafawa Balewa University, Bauchi.

2Department of Mechanical Engineering, Kaduna Polytechnic, Kaduna.

3Department of Mechanical Engineering, Federal Polytechnic, Mubi

Correspondent: engrbenjaminabur@gmail.com,

ABSTRACT

In this research paper, a conventional basin solar still for production of domestic drinking water using Bauchi climatic conditions (10.23°N, 9.84°E) is evaluated. The single glass cover basin solar still has a collector area of 0.9m2 and water holding capacity of 20 litres. Performance evaluation of the system using two identical size glass cover thickness of 4mm and 6mm in the Harmattan period shows that 4mm glass cover thickness increases the distillate water output, basin water temperature as well as efficiency of the solar still compared to 6mm glass cover thickness. The model produces 1.60 and 1.55 litres of pure water from brackish water using the 4mm and 6mm glass cover thicknesses respectively.

Keywords: Basin Solar still, Distillate Output, Glass Cover Thickness, Harmattan.


AND HUMIDITY MONITORING USING MICROCONTROLLER

Adewole Adekunle Olu  & Onaneye Abiodun Adefolarin

Computer Engineering Department, Abraham Adesanya Polytechnic, Ijebu-Igbo, Ogun State, Nigeria

Electrical/Electronic Engineering Department, Abraham Adesanya Polytechnic, Ijebu-Igbo, Ogun State, Nigeria

Kunleadewole2008@gmail.com

ABSTRACT

The Internet of Thing (IOT) is communication paradigm, embracing connections between physical objects, real world objects and the virtual world. The Internet of Things is a global network that connects physical objects using cloud computing, web applications, and devices that are network dependent and it permits devices to speak with each other, access, store and retrieve data from the Internet, and interact with users, making intelligent, deep, pervasive and perpetually connected environments. Microcontroller based devices are designed to work with IOT Services. The Microcontroller is a versatile device which cannot solely be used to control devices, however can also be used to read data from all kinds of sensors. In this paper we incorporated the use of microcontroller (ESP8266 WIFI module) which acts as interface for temperature and humidity sensor (DHT11). The data collected from this sensor were sent through the internet to a web server which functions as Sensing as a Service cloud server. The data were logged on remote server in real time. Remote monitoring, management and visualization of sensors data were achieved through any internet connected mobile devices. Whenever sensor’s data (temperature and humidity) updated on the cloud server is above certain value, an email alerts were sent to a preconfigured android phone connected to the internet.

Keywords: IOT cloud, Database, Sensors, Cloud computing, Sensing as a Service.


AN IMPROVEMENT FORECAST USING VECTOR AUTOREGRESSION APPROACH ON TAX REVENUE IN NIGERIA

Baba Gimba Alhassan and Nma Musa Tela 

Department of Statistics,

The Federal Polytechnic, Bida, Niger State

Email: gazhigun@gmail.com  

ABSTRACT 

The paper proposed an improved Multivariate time series model for tax revenue using Vector Auto regression (VAR) approach. The advantage of this study is to verify the error variance decomposition on both the transformed and un-transformed data. To check the efficiency this, approach the four stages of VAR were observed with R package to examine the MAE, RMSE, MAPE, and MSE. The result shows that, the error variance decomposition in transformed data is less than the error variance decomposition in Untransformed data (i.e 1.5e-15 < 2.2e-16) which means that, there’s significant difference in the error variance decomposition  The models suggested by information criterion procedure are different because VAR (1) model is selected for transformed data for all the criterions while  by information criterion procedures, however VAR (3) model is the most suitable model for the data sets based on the model adequacy checking and accuracy testing. 


Table of contents

Phytochemical and Anti Bacterial Activity of   Ziziphus Mucranata

Leaves Extract

Garba,U.,  Gayari, M.S., Boyi, M.Y and  S/Dogarai, B.B                                                 1-18

Study On The Effect of Different Concentration of Drumstick (Moringa oleifera)

Leaf Extract on Seed Germination and Early Growth of Water Mellon

(Citrullus lanatu)

Karaye I.U. , Shehu A.A., Sulaiman B. and Hannatu M.L                                              19-33

In vitro Callus Induction Potentials of Wheat Genotypes using Mature

Embryo as ex-plant source under different levels of Polyethylene glycol (PEG)

M.K. Haruna, C.U. Aguoru, C.C. Iheukwumere, C.I.C. Ogbonna, and I.D. Salisu         34-56

Effects of Titanium dioxide Nanoparticles on Population Growth rate of

Brachionus calyciflorus, pallas, 1766.

Oluwagbemiga Areo                                                                                                   57-74


EFFECTS OF TITANIUM DIOXIDE NANOPARTICLES ON POPULATION GROWTH RATE OF BRACHIONUS CALYCIFLORUS, Pallas, 1766.

Oluwagbemiga Areo,

ABSTRACT

This study was carried out to determine the toxicity of Titanium dioxide nanoparticles (TiO2 NPs) to a freshwater planktonic rotifer, Brachionus calyciflorus. Reconstituted water was used as the medium for the toxicity tests for both acute and chronic exposures. Acute concentrations of 0.01, 0.05, 0.10, 0.50 and 1.00mg/l of TiO2 NPs were used, from which the value of LC50 was obtained to establish chronic concentrations of 0.0065, 0.008 and 0.016mg/l of TiO2 NPs. The result of the acute toxicity test showed that TiO2 NPs was toxic on Brachionus calyciflorus with 81.67% mortality recorded as the concentration of the toxicant increased from 0.01mg/l to 1.00mg/l and LC50 of 0.065mg/l. For chronic exposure, population growth rate was determined. The exposure lasted 18 days, after which the population growth rate of the test organism significantly declined with increasing concentrations of TiO2 NPs, with the best population growth rate of 0.304d-1 at 0.0065mg/l concentration. This proves that TiO2 NPs are toxic on Brachionus calyciflorus, which paves way for a potential inference in offsetting the entire freshwater habitat. However, for more efficiency, further studies should be directed towards measures of preventing and or controlling the accumulation of TiO2 NPs in freshwater bodies and on aquatic organisms.


In vitro Callus Induction Potentials of Wheat Genotypes using Mature Embryo as ex-plant source under different levels of Polyethylene glycol (PEG

M.K. Haruna1, C.U. Aguoru2, C.C. Iheukwumere2, C.I.C. Ogbonna3, and I.D. Salisu4

1Department of Biology, Federal University Gashua, Yobe State, Nigeria.

2Department of Botany, University of Agriculture, Makurdi, Nigeria.

3Department of Biotechnology, University of Jos, Nigeria.

4Department of Biotechnology, Jigawa Research Institute, Kazaure.

Email: mokharry2013@gmail.com           

ABSTRACT

This work was carried out at Jigawa Research Institute Biotechnology Laboratory Kazaure to determine callus induction potentials of 16 wheat genotypes using matured embryo as ex-plant source under different (PEG) levels. The experiment had six treatments (0%, 5%, 10%, 15%, 20% and 25%) including control with each replicated three times and the necrotic percentage taken showed varieties 8(53.3%), 7(60%) and 28(61.1%) had minimal necrotic callus, while ANOVA shows that there is significance difference between the treatments percentage values (P<0.05), while there was positive correlation among the genotypes. Also the total number of callus recorded for each variety across treatment showed an encouraging callus production in varieties 8(38), 7(34), 2(32) and 6(31), however (ANOVA) shows significant difference between the treatment  mean values (p<0.05) while Pearson correlation coefficient among the genotypes indicated that there was positive correlation.

Keywords: Callogenesis, drought stress, embryo culture, tissue culture, Triticum aestivum L.


Study On The Effect of Different Concentration of Drumstick ( Moringa oleifera ) Leaf Extract on Seed Germination and Early Growth of Water Mellon (Citrullus lanatu)

1Karaye I.U. , 2 Shehu A.A., 2Sulaiman B. and 2Hannatu M.L

1Depertment of Biological Sciences Usmanu Danfodiyo University, Sokoto,

2Department of Biology Shehu Shagari College of Education, Sokoto

Email: ikaraye09@gmail.com

ABSTRACT

A study on the effect Moringa Oleifera leaf extract on Citrullus lanatus was carried out at the Biological Garden of Usman Danfodiyo University, Sokoto. The aim was to determine the effect of Moringa leaf extract at different concentration on seed germination and early seedling growth of C. Lanatus (water Mellon). Aqeotus extract was prepared by driving freshly leaf formed Moringa leaves with water and filted out to obtain liquid extract which was then diluted with water in the following concentrations: 0ml, 20ml, 40ml, 60ml, 80ml. control treatment was set up using disliked water only. The six treatment were applied directly on C. lanatus seeds raised in 18 poly pots of 18cm long 2cm wide. The experiment was laid out in a completely randomize design in three (3) replicate. It was run for 15 days. Data were collected on number of leaves, stem high, root length, shoots fresh and dry weight at harvest, while germination rate was within 15 days of the experiment and where subjected to analysis of varience. Result obtain showed significant (P˂ 0.05) effect of the treatment on all the characters measured. Base on the results obtain, Moringa leaf extract has an improving effect on seed germination and growth of C. lanatus parts farmers are therefore recommended to adopt the use of this extract since it is easier, inexpensive, cheaper and can be obtain in large quantities in order to meet up demand of large hectares of land 


Recent Comments

    Categories