APPLICATIONS OF COMPOSITE MATERIALS IN THE DEVELOPMENT OF AEROSPACE INDUSTRY

Ogakwu Paul Andrew & Okpanachi George Echiye

Department of Mechanical Engineering, Federal Polytechnic Idah, Kogi State

Mechanical and Manufacturing Division, Centre for Satellite Technology Development, Abuja

Email: okpanachi1976@gmail.com

ABSTRACT: Composites materials are intended to be used more extensively as an alternative of aluminium structure in aircraft and aerospace applications. This is due to their attractive properties as high strength-to-weight ratio and stiffness to weight ratio. Besides that it clarifies the growing interest for composite materials due to advantages of lightweight, high strength, high stiffness, superior fatigue life, tremendous corrosion resistance and low cost manufacturing. Composites have attractive mechanical and physical properties that are now being utilized in automotive industry. New fibres, polymers, and processing techniques for all classes of composites are constantly being developed. Research is also on going to improve repair techniques, recyclability, and the bonding between fibres and matrix materials.


EMERGENCE OF INTEGRATED CIRCUIT AS A MEANS OF DEEPENING DEVELOPMENT IN ENGINEERING IN ERA OF GLOBALIZATION

Nwosu, Frederick Chukwuebuka

Department of Electrical/Electronic Engineering,

Federal Polytechnic Oko

Email: jirebus@gmail.com

ABSTRACT: One of the solid-state (semiconductor) devices utilized in electronics is integrated circuit (IC), usually built using silicon. In this modern era characterized by globalization, integrated circuit, through its application in electronic devices and computer, serves as a means to foster development in engineering. The paper is a discussion on how emergence of integrated circuit is a means to deepen development in engineering in era of globalisation. The paper emphasized on: engineering as a resource for development, use of integrated circuit in modern electronics, and utilization of electronics in promoting development in engineering. Certain recommendations were made based on the role and value of integrated circuit (IC) used in electronics for enhancing development in engineering. The paper pointed out that integrated circuit is employed in electronic system like computer which has brought about the existence of information technology and the internet. The use of electronic systems has helped in development of engineering in era of globalization by fostering productivity, intellectual acquisition, and communication.


PROXIMITY INTRUDER SECURITY SYSTEM: A TECHNOLOGICAL AND SCIENTIFIC INNOVATION FOR SOCIAL AND NATIONAL DEVELOPMENT

1Taneh, Nadum Anthony, 2Ndudi Christopher Okorieocha, 3Harry Inye H.  

1&3Department of Electrical Electronic Engineering, Ken Saro-Wiwa Polytechnic, Bori Rivers State, Nigeria

2Departmentof Industrial Technology Education, Michael Okpara University of Agriculture, Umudike, Abia State, Nigeria

Email: nadumtaneh@yahoo.com, okorieochachris@yahoo.com & ipadibi@yahoo.com

ABSTRACT: Proximity Intruder Security Alarm system, as the name implies, is a system that detects an intruder within a proximity up to two meters range within an unauthorised area. It is a system that alerts security personnel, residents of an environment, and of course scares hoodlums away. This innovative work carried out 4 different tests on 3 types of sensors to ascertain their extent of coverage. The tests were carried out on ultrasonic sensor, infrared sensor, and linear sensor. The test analyses shows that ultrasonic sensor has a longer distance up to 1.8 meters and wider radius coverage of 360o, linear sensor 1.5 meters, 90o, and infra-red sensor 1 meter, 90o. The following components were used to achieve this laudable innovative work: linear, infra-red or ultrasonic sensor any of the sensors can be used along with contactor, revolving light, control box, auxiliary contacts, alarm, reset switch, pilot lamps, sling, hard object, motor, limit switch and power cord. It was concluded that criminality and insecurity had continued to subject private homes, business offices and industrial areas into state of dilemma, dwindling social and economic development of the nation. The following recommendations were proffered, that the system should be installed in places like residential, commercial areas, industrial, mini stores, super market, banks, all dwellings areas for protection against burglary, (theft) or property damage, as well as personal protection against intruders.


THE EFFECT OF COR ON THE RISER REACTOR PERFORMANCE OF THE

FCCU

Yousuo Digieneni

Department of Chemical Engineering,

Niger Delta University, Yenagoa, Bayelsa State of Nigeria

E-mail: digieneniyousuo@yahoo.com;

ABSTRACT: A review on the Fluid catalytic cracking unit (FCCU) catalyst system was carried out. The riser reactor was stimulated using COMSOL Multiphysics computational fluid dynamics (CFD) software. The extra fine mesh generator of the COMSOL Multiphysics software was used to produce grid refinement in the riser reactor. The effect of catalyst oil ratio (COR) on riser reactor yields were studied. The results showed that the gasoline yield increases with the increasing COR, hold up of catalyst (1-ε) increased with increase of COR and so for all investigated input catalyst temperature the increase of hold up can lead to higher conversion and pressure drop. A maximum on gasoline yield appears when COR is 7 making gasoline yield going up to almost 52%. A minimum on coke yield appears when COR is 5 making coke yield up to 2%.


EXPERIMENTAL STUDY OF PHYSICAL PROPERTY CHANGES IN MONODORA MYRISTICA SEED DURING ROASTING

Kwino Danlami Ibi & Benjamin A. Iwan        

Department of Agricultural and Bio – Environmental Engineering,

College of Agriculture, Jalingo, Taraba State

Email: kwinodanlami@gmail.com 

ABSTRACT: Thermal processes have been reported to affect the properties of biomaterials including seeds. Monodora myristica seeds are usually roasted prior to shelling, milling and use. The changes in the physical properties of Monodora myristica seeds during roasting were investigated in this study. The specific objectives of the study were to roast Monodora myristica seeds at different temperature and time combinations, determine the effect of the roasting parameters on the physical and frictional properties. Roasting parameters which include the roasting temperature at three levels (140, 170 and 200 oC) and roasting time at four levels (2, 7, 12 and 17 min.) were employed resulting in a 3 x 4 factorial experiment. The study revealed that the roasting temperature had no significant effect (p>0.05) on the size, shape and volume of the seeds. However, the roasting time significantly affected (p<0.05) the width, arithmetic and geometric diameters, and the volume except the length and the thickness. The length ranged from 17.22 to 18.87 mm, 17.93 to 18.08 mm, and 17.74 to 18.64 mm as the temperature increased from 140 to 200 oC and the time increased from 2 to 17 min. while the thickness ranged from 11.30 to 12.17 mm, 11.73 to 11.98 mm and 11.76 to 12.00 mm. The roasting parameters significantly affected (p<0.05) the complex geometric properties except the sphericity and the specific surface area. The effect of the roasting parameters on the angle of repose and the static coefficient of friction were significant (p<0.05) and followed the same trend. The highest mean coefficient of static friction values of 0.58, 0.53, and 0.53 were recorded at the 200 oC and 17 min. roasting condition on plywood, plastic and aluminum surfaces, respectively.


MODELLING THE DYNAMIC MECHANISM OF A METAL BULB TEMPERATURE TRANSMITTER

Seigha I. Fetepigi, Zekieni R. Yelebe* and Revelation J. Samuel

Department of Chemical/Petroleum Engineering,

Niger Delta University, Wilberforce Island, Bayelsa State, Nigeria.

E-mail: yelebezr@gmail.com

ABSTRACT: A mathematical model for the dynamic mechanism of a metal bulb temperature transmitter is developed. The model was formulated based on the mechanism of heat transfer, transmission of pressure along the capillary tube and the bellows movement. The combination of these three mechanisms produced the desired result of developing a transfer function that relates changes in bellows movement to changes in the temperature of the liquid in which the gas filled metal bulb is immersed. To obtain this transfer function requires that the inflow rate into the bellows be expressed as the ratio of difference in pressure to resistance at the entrance to the bellows. The transfer function obtained was translated to real time expression using the inverse Laplace transform technique.


POLYCYCLIC AROMATIC HYDROCARBONS IN SOILS WITHIN THE COALITE PLANT IN BOLSOVER, NORTH DERBYSHIRE

Ivwurie W., Emelife S.C., Sun C. and Snape C.

Department of Chemistry,

Federal University of Petroleum Resources, Effurun

Email: wivwurie@yahoo.co.uk

Abstract: Five soil samples collected at varying distances from the Coalite plant in Bolsover, North Derbyshire were analyzed for Polycyclic Aromatic Hydrocarbons using GC-MS. The concentrations of the PAHs ranged from 0.03-2mgg-1 with a mean concentration of 4.50mgg-1  1.51mgg-1. The PAH diagnostic ratio (Flu / (Flu + Py)) showed a predominant contribution from liquid fossil fuel combustion and coal combustion with a least contribution from petroleum source.


Table of Contents

Chemical and Sensory Properties of Milk Developed from Two Varieties

of Bambara Groundnut (Vigna subterranean)

Okudu, H.O,. Ojinnaka, M.C. & Iloh C.                                                                                     1-13

Quantification of Antimicrobial Metabolites Produced by Lactic Acid Bacteria

(Lab) Isolated from Fermented Food Products

Samira Arzika, Musliu Abdulkadir, Jemilu M. Ambrusa & Idayat Shade Ijaiya                                   14-28

Assessment of Cardiovascular Risk Factors among Quarry Workers in Ogun State

Ilori O.A,Nupo S.S, Akinlotan J.V                                                                                             29-40

Determination of Pesticide Residues in Commonly Produced Vegetables

in Mubi Metropolis, Adamawa State, Nigeria

Alexander, Priscilla                                                                                                                  41-50

Water Treatment using Moringa Oleifers Seeds

I. Muhammad, H. Garba, A. Isa, Aisha S.                                                                                 51-57

Evaluation of Some Heavy Metals in Fruits

Baba Umar Abba Mustapha, Yakubu Baban Kanada, Goni Chamba,

Babagana Mustapha & Abdullahi Muhammed                                                                      59-72


EVALUATION OF SOME HEAVY METALS IN FRUITS

Baba Umar Abba Mustapha, Yakubu Baban Kanada, Goni Chamba, Babagana Mustapha & Abdullahi Muhammed

Department of Science Laboratory Technology, Ramat Polytechnic, Maiduguri, Borno State, Nigeria

Department of Science Laboratory Technology, Ramat Polytechnic, Maiduguri, Borno State, Nigeria

Nafdac Area Laboratory, Maiduguri, Borno State, Nigeria

Department of Science Laboratory Technology, Ramat Polytechnic, Maiduguri, Borno State, Nigeria

Department of Quantity Survey, Ramat Polytechnic, Maiduguri, Borno State, Nigeria

Email: babaumar144@yahoo.com  

ABSTRACT

Exposure of heavy metals to human being has risen dramatically in the last 50 years. In today’s urban and industrial society, there is no escaping from exposure to toxic chemicals and heavy metals. Humans are more likely to be exposed to heavy metal contamination from the dust that adheres to edible plants than from bioaccumulation. This is because it is very difficult to wash off all the dust particles from the plant material before ingesting them. The objectives of this experiment were to determine the concentration of heavy metals in some fruits. Based on the findings it was obtained from the elemental analysis of the fruits samples, iron, zinc, cadmium and lead each are having varying concentrations with considerable elemental value which confirmed the importance of these fruits. It was also confirmed that these fruits had great food and importance for human need as source of vitamin C, the fruits can be used in pharmaceutical industries for the production of medicine for treatment of many diseases such as heart disease. It was recommended that the fruits should be taken by human on daily basis, the cultivation and world production should be encouraged and further studies should be carried out of other fruits like pineapple, pawpaw and cashew fruits for heavy metals content.

Keywords: Heavy Metals, Fruits, Toxic Chemicals, Human Being.


WATER TREATMENT USING MORINGA OLEIFERS SEEDS

I. Muhammad, H. Garba, A. Isa, Aisha S.

Department of Science Laboratory Technology,

Ramat Polytechnic, Maiduguri, Maiduguri, Borno State, Nigeria

Email: bajoga1muh@gmail.com

ABSTRACT

Moringa Oleifera seed is applied as coagulant in place of aluminum sulphate (Alum) used in conventional treatments plants. In this work, water is treated using moringa Oleifera seeds. The parameters were tested before and after the water were treated for seven days with the moringa seeds. The water samples (sample A, B, C, and D) were collected from four deferent locations in Gwange Word, Maiduguri. The results for the water samples before treatment showed that the sample from all the four locations (200ml each) are turbid and have a pH of 8 with the exception of location D which has a pH of 9. The samples showed a varying total bacteria count (103cfu), A (297), B (272), C (92) and D (71). All the  moringa treated water samples are not turbid and showed a pH of seven (7) and a varying total bacteria count (103cfu) of 3 for sample A, sample B(1), sample C and D showed Zero(0).  The present study was carried out to confirm the effectiveness of seed powder extracted from mature dried Moringa Oleifera seeds which are commonly available in most communities.

Keywords: Pathogens, Alum, Drumstick, Horseradish


Recent Comments

    Categories